PSE 14,000 SL XLT Scissor Alignment Lift

PSE 14,000 SL AA
& PSE 14,000 SL AI

14,000 LB. Alignment Scissor Lift


Our PSE 14,000 SL AA & PSE 14,000 SL AI Scissor Lift is designed for use in professional garge environments where efficiency and speed are key. This lift is being used in commercial service centers all over the world.

These models are carefully designed to be the best solution for a variety of applications based on the dimensions and weights of the vehicles usually serviced.

All of our Scissor Lifts are sold as both above ground and in-ground lifts. This versatility allows for a flush mounted lift in recessed concrete, or a surface mounted lift that requires no modification to the floor.

These Scissor Lifts are designed to have large runways for their weight classes, and they are manufactured to provide a rugged, stable working platforms that will provide the precision demanded when doing wheel alignment work.

Welded Rails support a set of 2 INCLUDED Air / Hydraulic Rolling Bridge Jacks on the inside of each runway with a wide range of operation for servicing almost any vehicle.


Product Features:
  • Accommodates wide range of vehicles (width adjustable turn table recesses for front wheel positioning).
  • Heavy duty construction that is precision balanced for wheel alignment.
  • Radius Gauge Turntables with multi position recesses in the runways.
  • INCLUDES 2 flush mounted Rolling Bridge Jacks with push button controls and air powered operation capable of reaching a wide range of vehicle lifting points.
  • Over engineered and reinforced link structure for smooth and longer operational life.
  • Lockable Flush Mounted Ball Bearing Skidplates make each of these Scissor Lifts perfect for performing complete precision alignments on a wide range of wheel bases.
  • Long Approach Ramps provide a very low approach angle that is safe for lower profile vehicles.
  • Powerful, Self Synchronized 4 Cylinder Lifting System that is self synchronized for power and stability.
  • Precision Mechanical Gear Safety Locking System with Air Lock Release.
  • Operator Console with Push Button Controls and Power Unit housing.
  • Wired Remote Controls
  • Emergency Manual Pump for lowering
  • Powder Coat Paint Finish
Product Specs for the PSE 14,000 SL
Model Number: PSE 14,000 SL
Capacity: 14,000 LBS.

Inground (AI) OR

Above Ground (AA)

Shipping Weight: 7,775 LBS.
Lowered Height: 12"
Runway Length (w/ Ramps) 280"
Runway Length (w/OUT Ramps) 207½"
Overall Width: 88½"
Width of Runways: 26½"
Outside Width of Both Runways: 88½"
Clearance Between Runways: 32¾"
Maximum Lifting Height to Top of Runways: 78¾"
Minimum Alignment Wheelbase 81¾"
Maximum Alignment Wheelbase 162¼"
Lifting Speed (Lift) 50 Seconds
Lifting Speed (Bridge Jack) 15 Seconds
Lowering Speed (Lift) 45 Seconds
Lowering Speed (Bridge Jack) 30 Seconds
Motor HP: 2HP
Motor Voltage: 220V / 380V
Phase / Frequency 4P / 60 Hz

Package Dimensions:
Shipping Method: Freight (LTL)
Shipping Length: 229"
Shipping Height: 50"
Shipping Width: 29"
Shipping Weight 7,775 LBS.
Packaging Information:

This equipment weighs approximately 7,775 LBS. If you have any questions or would like more information on this equipment, Call 1-800-708-3126 to speak to a Pro-Series Equipment rep today.

Shipping Process:

This equipment will ship as a FREIGHT item via LTL common carrier. The customer is responsible for providing a shipping address that will be able to accept the shipment. Customers are responsible to ensure that the shipping address provided will be able to accomodate a large 18 wheel truck pulling into the drive / dock without any problems.

It is also the responsibility of the customer to unload the equipment from the truck when it is delivered. Due to the size and weight of the equipment, a forklift or wrecker boom will be required!

If the customer is unsure if the truck will be able to unload the shipment on their drive, and they do not have access to a commercial dock, it is strongly recommended that the equipment be delivered to a trucking terminal in the customer's area. The terminal staff will be able to unload the equipment from the trailer and load it onto a truck or trailer at no additional cost.

For more information on shipping policies for Pro-Series Equipment, click here.


This lift will come packaged between two steel shipping plates. The Power Unit will be banded to the lift, and all of the components, hardware and anchor bolts will be packaged inside the lift columns.

Required Tools & Materials:

You will need the following items in order to install this lift:

Concrete Rotary Hammer Drill w/ ¾" Carbide Bit, Rubber Hammer, 2 LB. Sledge Hammer, Chalk Line & Square, Socket Wrenches, Open End Wrenches, Ratchet Driver, Locking Pliers, Measuring Tape, Screwdrivers, Torque Wrench, Step Ladder, 4' Bubble Level, & 12" Adjustable Wrench.

You will also need to have 3 Gallons of AW-32 non-foaming, non-detergent Hydraulic Fluid.

Electrical Requirements:

This lift requires a 220V, Single Phase power supply on a dedicated 20 AMP circuit breaker. All electrical wiring for this lift should be done by a certified electrician!

Concrete Requirements:

The lift should be installed on a level floor with a minimum of 4" - 6" of 3,000 psi concrete (sufficiently cured). If you are unsure of the thickness of the concrete, it is best to test drill where the lift is to be installed to verify the depth of the concrete.

Installation Overview:

The instructions in the included manual should be carefully followed step by step. Our lifts are often installed by our customers, and usually will take from 4-5 hours to finish. Professional lift installation services are likely available in your area for a fee, please consult your sale representative if you are interested in learning more!

"You Can Always Count On The Pros!"

Subscribe To Our Newsletter!

Get these FREE email updates:

  • New Products
  • Special Offers
  • Expert Tips

Live Chat Support Software

1-800-708-3126     HOURS: Mon-Fri: 8am-5pm Sat: 8am-Noon | CONTACT US | DISTRIBUTOR LOGIN

Motorcycle Lifts 2 Post Lifts 4 Post Lifts Scissor Lifts
Tire Changers Wheel Balancers Tire Spreaders Brake Lathes Wheel Dollies
Sandblast Cabinets Shop Presses Oil Drains Jacks, Pumps & Rams Floor Jacks Transmission Jacks Engine Service Equipment Work Benches Salt Spreaders Snow Plows Main
About Us Contact Form Distributor Info Financing All Documentation Product Catalog Purchasing Checklist Shipping Info Warranty Info
PSE ATC 10,000 BP PSE ATC 10,000 OH PSE 10,000 BP PSE 10,000 OH PSE 12,000 BP PSE 12,000 OHP 2 Post Lift Accessories
PSE 8,000 CSP PSE 8,000 CSP XLT PSE 10,000 CSP PSE 10,000 CSP XLT PSE 12,000 FP PSE 14,000 FP PSE 14,000 FP 4 Post Lift Accessories
PSE TCPL6 Mid Rise Lift
PSE TC-150 PSE TC-260 PSE TC-370 PSE TC-470 PSE TC-570 Tire Changer Accessories
PSE WB-160 PSE WB-260 PSE WB-360 PSE WB-BWB Wheel Balancer Accessories
PSE SP-9220 PSE SP-9020 PSE SP-9120A PSE SP-9030 PSE SP-9240
Pumps Bottle Jacks Rams & Cylinders