PSE 8,000 CSP 4 Post Portable Lift

PSE 8,000 CSP

8,000 LB. 4 Post Portable Car Stacker Lift

PRODUCT OVERVIEW:

The PSE 8,000 CSP is a 4 Post Lift designed with car collectors, hobby mechanics and those looking to add parking space to their garage in mind.

$1,899.95

 

INCLUDES:
  • FREE Complete 4 Piece Caster Kit - This Makes The PSE 8,000 CSP Portable!
  • FREE 3 Plastic Drip Trays
  • FREE 1 Steel Jack Tray
  • FREE Two Detachable 34" Steel Approach Ramps
  • FREE 4 Detachable Runway Stop Plates
  • ATTENTION: Many of the included items listed above are sold as seperate accessories by our competitors - with the PSE 8,000 CSP, you get the COMPLETE Package!
  • Also Includes Many Other Features!

Customers can leave their CSP lift unanchored to the floor to allow portability, or can anchor the lift to the floor to provide extra stability and lift strength for heavier loads.

We also carry a full line of Bridge Jacks for use on our CSP lifts, which can also be used with almost any 4 Post Hobbyist Lift on the market today!


PRODUCT DETAILS:
Product Features:
  • 110V Power Unit: The 110V Power Unit simplifies setup and makes this lift very easy to setup!
  • Single Point Lock Release: The Lock Release design on our 4-Post lifts makes disengaging the safety locks a fast, simple, ONE Step process!
  • Car Stop Plates: 4 Car Stop Plates are included to allow you to secure vehicles from the front and rear, preventing accidents and increasing safety!
  • Steel Jack Tray: A sliding, Heavy Duty Jack Tray is included to provide a platform for lifting vehicles off of the Runways as needed for maintenance.
  • 3 Drip Trays: The 3 Included Drip Trays with the PSE 8,000 CSP help collect waste oil and also help protect vehicle parked underneath!
  • Heavy Duty Steel Aircraft Cables: Our Portable 4-Post Lifts utilize a Heavy-Duty Braided Steel Aircraft Cable driven design and use only one Hydraulic Cylinder.
  • Steel Block Safety Latch Locking System: The Locking System on the PSE 8,000 CSP XLT uses Heavy Duty Steel Components for maximum safety!
  • 34" Approach Ramps: With 34" Drive-On Approach Ramps and Diamond Plate design, getting vehicles onto this lift is easy! This provides a low angle approach and means that Low Profile vehicles are NO Problem!
  • Steel Caster Kit: The Included Steel Caster Kits provide smooth rolling action when moving this lift.
Product Specs for the PSE 8,000 CSP
Model Number: PSE 8,000 CSP
Capacity: 8,000 LBS.
Configuration: Portable
Gauge of Steel: 3/16"
Post Dimensions: 4½" x 6"
Shipping Weight: 1,900 LBS.
PHYSICAL DIMENSIONS:  
Overall Height: 84"
Height of the Posts: 82"
Runway Length (w/ Ramps) 166"
Runway Length (w/OUT Ramps) 203"
Width Outside Posts: 102"
Clearance Between Posts: 92"
Width of Runways: 18½"
Outside Width of Both Runways: 75"
Clearance Between Runways: 37"
VEHICLE LIFTING SPECS:  
Max. Lifting Height to Top of Runways: 76"
Max. Lifting Height on Top Lock: 72½"
Max. Clearance Under Runways: 72"
Max. Clearance on Top Lock: 68½"
Lifting Speed (Approx.) 70 Seconds
LOCKING SPECS:  
Safety Locking Positions: 11

Safety Locking Positions:

(To BOTTOM of Runway)

18", 35", 40", 44", 48",

52", 57", 61", 65",

69½", 70¼"

Safety Locking Positions:

(To TOP of Runway)

22¼", 39¼", 44¼",

48¼", 52¼", 56¼",

61¼", 65¼", 69¼",

73½", 74½"

POWER UNIT SPECS:  
Motor HP: 2HP
Motor Voltage: 110V
Phase / Frequency / AMP 1 P / 60 Hz / 20 AMP

SHIPPING INFORMATION:
Package Dimensions:
Shipping Method: Freight (LTL)
Shipping Length: 167"
Shipping Height: 27"
Shipping Width: 21½"
Shipping Weight 1,900 LBS.
Packaging Information:

This equipment weighs approximately 1,900 LBS. If you have any questions or would like more information on this equipment, Call 1-800-708-3126 to speak to a Pro-Series Equipment rep today.

Shipping Process:

This equipment will ship as a FREIGHT item via LTL common carrier. The customer is responsible for providing a shipping address that will be able to accept the shipment. Customers are responsible to ensure that the shipping address provided will be able to accomodate a large 18 wheel truck pulling into the drive / dock without any problems.

It is also the responsibility of the customer to unload the equipment from the truck when it is delivered. Due to the size and weight of the equipment, a forklift or wrecker boom will be required!

If the customer is unsure if the truck will be able to unload the shipment on their drive, and they do not have access to a commercial dock, it is strongly recommended that the equipment be delivered to a trucking terminal in the customer's area. The terminal staff will be able to unload the equipment from the trailer and load it onto a truck or trailer at no additional cost.

For more information on shipping policies for Pro-Series Equipment, click here.

INSTALLATION OVERVIEW:

This lift will come packaged between two steel shipping plates. The Power Unit will be banded to the lift, and all of the components, hardware and anchor bolts will be packaged inside the lift columns.

Required Tools & Materials:

You will need the following items in order to install this lift:

Concrete Rotary Hammer Drill w/ ¾" Carbide Bit, Rubber Hammer, 2 LB. Sledge Hammer, Chalk Line & Square, Socket Wrenches, Open End Wrenches, Ratchet Driver, Locking Pliers, Measuring Tape, Screwdrivers, Torque Wrench, Step Ladder, 4' Bubble Level, & 12" Adjustable Wrench.

You will also need to have 3 Gallons of AW-32 non-foaming, non-detergent Hydraulic Fluid.

Electrical Requirements:

This lift requires a 220V, Single Phase power supply on a dedicated 20 AMP circuit breaker. All electrical wiring for this lift should be done by a certified electrician!

Concrete Requirements:

The lift should be installed on a level floor with a minimum of 4" - 6" of 3,000 psi concrete (sufficiently cured). If you are unsure of the thickness of the concrete, it is best to test drill where the lift is to be installed to verify the depth of the concrete.

Installation Overview:

The instructions in the included manual should be carefully followed step by step. Our lifts are often installed by our customers, and usually will take from 4-5 hours to finish. Professional lift installation services are likely available in your area for a fee, please consult your sale representative if you are interested in learning more!

"You Can Always Count On The Pros!"

Subscribe To Our Newsletter!

Get these FREE email updates:

  • New Products
  • Special Offers
  • Expert Tips

Live Chat Support Software

1-800-708-3126     HOURS: Mon-Fri: 8am-5pm Sat: 8am-Noon | CONTACT US | DISTRIBUTOR LOGIN

Motorcycle Lifts 2 Post Lifts 4 Post Lifts Scissor Lifts
Tire Changers Wheel Balancers Tire Spreaders Brake Lathes Wheel Dollies
Sandblast Cabinets Shop Presses Oil Drains Jacks, Pumps & Rams Floor Jacks Transmission Jacks Engine Service Equipment Work Benches Salt Spreaders Snow Plows Main
About Us Contact Form Distributor Info Financing All Documentation Product Catalog Purchasing Checklist Shipping Info Warranty Info
PSE TCML PSE TCMLW PSE TCML XLT
PSE ATC 10,000 BP PSE ATC 10,000 OH PSE 10,000 BP PSE 10,000 OH PSE 12,000 BP PSE 12,000 OHP 2 Post Lift Accessories
PSE 8,000 CSP PSE 8,000 CSP XLT PSE 10,000 CSP PSE 10,000 CSP XLT PSE 12,000 FP PSE 14,000 FP PSE 14,000 FP 4 Post Lift Accessories
PSE TCPL6 Mid Rise Lift
PSE TC-150 PSE TC-260 PSE TC-370 PSE TC-470 PSE TC-570 Tire Changer Accessories
PSE WB-160 PSE WB-260 PSE WB-360 PSE WB-BWB Wheel Balancer Accessories
PSE TCTS1 PSE TCTS2 PSE TCTS3
PSE TCSC1 PSE TCSC2 PSE TCSC3
PSE SP-9220 PSE SP-9020 PSE SP-9120A PSE SP-9030 PSE SP-9240
PSE TCTDNP PSE JM-POD-18G PSE JM-ODT-68L PSE JM-ODT-30G PSE JM-OEX-18G PSE 17892 PSE TCGC
Pumps Bottle Jacks Rams & Cylinders