PSE ATC 10,000 BP 2 Post Base Plate Lift

PSE ATC 10,000 BP

10,000 LB. 2 Post Base Plate Lift

PRODUCT OVERVIEW:

The PSE ATC 10,000 BP is a 10,000 LB. an affordable, commercial grade 2 Post Lift.

This is a Two Post BASE PLATE / OPEN TOP Vehicle Lift. The PSE ATC 10,000 BP features symmetric columns and your choice of either Symmetric or Asymmetric lifting arms.

The Base Plate design used on this model allows this lift to be installed in low ceiling environments. The cables and hydraulic hoses are routed under a base plate between the two posts. With a post height of only 9'-3", this lift can be installed in almost any garage. Careful consideration must be taken for the vehicles that will be lifted, while the posts themselves require only low ceilings, the height of the actual vehicle itself, along with the lifting height of this equipment must be accounted for to prevent vehicle damage.

The PSE ATC 10,000 BP lift also includes a 12 pc. set of peg style drop-in truck adapters, a powerful 220V hydraulic power unit, dual point safety lock release, powder coat finish, & all installation hardware.

$2,099.95

PRODUCT DETAILS:
Product Features:
  • 9'-3" Tall Base Plate Design: The PSE ATC 10,000 BP utilizes a Base Plate driven design that makes it perfect for all Low Ceiling Applications!
  • Heavy Duty Lock System & Carriage: Heavy-Duty Steel Carriages for extra durability and strength.
  • 220V Power Unit: Our powerful 220V Power Units are manufactured to strict specifications and increase speed & durability for all Pro-Series Equipment lifts!
  • Drop-In Truck Adapters INCLUDED: This 12 Piece set of Drop-In Lifting Adapters increases lifting height up to 6'-8" and allows easy lifting contact with almost any Vehicle Frame.
  • Heavy-Duty Arm Lock Restraints: These arm lock restraints feature large gears for locking arms into lifting position.
  • Your Lifting Arm Choice: Symmetric OR Asymmetric Arms: With 2 separate arm sets available, you decide: 50/50 OR 70/30!
Product Specs for the PSE ATC 10,000 BP
Model Number: PSE ATC 10,000 BP
Weight Capacity: 10,000 LBS.
Design Style: Base Plate (Open Top)
Column Configuration: Symmetric
Lifting Arm Configuration: Symmetric OR Asymmetric
Floor Plate Dimensions: 18" x 13½"
Column Dimensions: 11 x 7¼"
Shipping Weight: 1,650 LBS.
PHYSICAL DIMENSIONS  
Lift Height Overall: 111"
Lift Width Overall: 136"
Drive Thru Clearance: 102"
Width Inside Columns: 110"
Width Outside Columns: 125"
VEHICLE LIFTING SPECS:  
Max. Clearance Under Lift Arms: 70½"
Max. Lift Height (Natural): 74½"
Max. Lift Height (w/ Included Adapters): 80"
Min. Lift Pad Height: 4"
Safety Locking System: Dual Point Release
Lifting Time: 50 Seconds
LIFTING ARM SPECS:  
Front Arm Reach (Symmetric): 36¼" - 49½"
Rear Arm Reach (Symmetric): 36¼" - 49½"
Front Arm Reach (Asymmetric): 29½" - 40¼"
Rear Arm Reach (Asymmetric): 39" - 57½"
POWER UNIT SPECS  
Motor HP: 2 HP
Motor Voltage: 220V
Phase / Frequency / AMP: 1P / 60Hz / 20 AMP

SHIPPING INFORMATION:
Package Dimensions:
Shipping Method: Freight (LTL)
Shipping Length: 115"
Shipping Height: 40"
Shipping Width: 18½"
Shipping Weight 1,650 LBS.
Packaging Information:

This equipment weighs approximately 1,650 LBS. If you have any questions or would like more information on this equipment, Call 1-800-708-3126 to speak to a Pro-Series Equipment rep today.

Shipping Process:

This equipment will ship as a FREIGHT item via LTL common carrier. The customer is responsible for providing a shipping address that will be able to accept the shipment. Customers are responsible to ensure that the shipping address provided will be able to accomodate a large 18 wheel truck pulling into the drive / dock without any problems.

It is also the responsibility of the customer to unload the equipment from the truck when it is delivered. Due to the size and weight of the equipment, a forklift or wrecker boom will be required!

If the customer is unsure if the truck will be able to unload the shipment on their drive, and they do not have access to a commercial dock, it is strongly recommended that the equipment be delivered to a trucking terminal in the customer's area. The terminal staff will be able to unload the equipment from the trailer and load it onto a truck or trailer at no additional cost.

For more information on shipping policies for Pro-Series Equipment, click here.

INSTALLATION OVERVIEW:

This lift will come packaged between two steel shipping plates. The Power Unit will be banded to the lift, and all of the components, hardware and anchor bolts will be packaged inside the lift columns.

Required Tools & Materials:

You will need the following items in order to install this lift:

Concrete Rotary Hammer Drill w/ ¾" Carbide Bit, Rubber Hammer, 2 LB. Sledge Hammer, Chalk Line & Square, Socket Wrenches, Open End Wrenches, Ratchet Driver, Locking Pliers, Measuring Tape, Screwdrivers, Torque Wrench, Step Ladder, 4' Bubble Level, & 12" Adjustable Wrench.

You will also need to have 3 Gallons of AW-32 non-foaming, non-detergent Hydraulic Fluid.

Electrical Requirements:

This lift requires a 220V, Single Phase power supply on a dedicated 20 AMP circuit breaker. All electrical wiring for this lift should be done by a certified electrician!

Concrete Requirements:

The lift should be installed on a level floor with a minimum of 4" - 6" of 3,000 psi concrete (sufficiently cured). If you are unsure of the thickness of the concrete, it is best to test drill where the lift is to be installed to verify the depth of the concrete.

Installation Overview:

The instructions in the included manual should be carefully followed step by step. Our lifts are often installed by our customers, and usually will take from 4-5 hours to finish. Professional lift installation services are likely available in your area for a fee, please consult your sale representative if you are interested in learning more!

"You Can Always Count On The Pros!"

Subscribe To Our Newsletter!

Get these FREE email updates:

  • New Products
  • Special Offers
  • Expert Tips

Live Chat Support Software

1-800-708-3126     HOURS: Mon-Fri: 8am-5pm Sat: 8am-Noon | CONTACT US | DISTRIBUTOR LOGIN

Motorcycle Lifts 2 Post Lifts 4 Post Lifts Scissor Lifts
Tire Changers Wheel Balancers Tire Spreaders Brake Lathes Wheel Dollies
Sandblast Cabinets Shop Presses Oil Drains Jacks, Pumps & Rams Floor Jacks Transmission Jacks Engine Service Equipment Work Benches Salt Spreaders Snow Plows Main
About Us Contact Form Distributor Info Financing All Documentation Product Catalog Purchasing Checklist Shipping Info Warranty Info
PSE TCML PSE TCMLW
PSE ATC 10,000 BP PSE ATC 10,000 OH PSE 10,000 BP PSE 10,000 OH PSE 12,000 BP PSE 12,000 OHP 2 Post Lift Accessories
PSE 8,000 CSP PSE 8,000 CSP XLT PSE 10,000 CSP PSE 10,000 CSP XLT PSE 12,000 FP PSE 14,000 FP PSE 14,000 FP 4 Post Lift Accessories
PSE TCPL6 Mid Rise Lift
PSE TC-150 PSE TC-260 PSE TC-370 PSE TC-470 PSE TC-570 Tire Changer Accessories
PSE WB-160 PSE WB-260 PSE WB-360 PSE WB-BWB Wheel Balancer Accessories
PSE TCTS1 PSE TCTS2 PSE TCTS3
PSE TCSC1 PSE TCSC2 PSE TCSC3
PSE SP-9220 PSE SP-9020 PSE SP-9120A PSE SP-9030 PSE SP-9240
PSE TCTDNP PSE JM-POD-18G PSE JM-ODT-68L PSE JM-ODT-30G PSE JM-OEX-18G PSE 17892 PSE TCGC
Pumps Bottle Jacks Rams & Cylinders