The PSE 12,000 OHP is a heavy-duty, commercial grade, 12,000 LB. 2 Post Lift perfect for lifting heavy trucks and vans. This lift is made for home mechanics or high volume shops & garages.
Overhead lifts like this model are the design of choice for many professional mechanics because they leave a clear floor underneath the lift, this makes moving tools such as Oil Drains, Transmission Jacks, Safety Stands / Jack Stands and other equipment under vehicles very easy!
The PSE 12,000 OHP lift also includes a 4 pc. set of screw-up style drop-in lifting adapters, a powerful 220V hydraulic power unit, SINGLE POINT safety lock release system, powder coat finish, & all installation hardware.
Model Number: | PSE 12,000 OHP |
---|---|
Weight Capacity: | 12,000 LBS. |
Design Style: | Base Plate (Open Top) |
Column Configuration: | Symmetric |
Lifting Arm Configuration: | Symmetric & Asymmetric |
Shipping Weight: | 2,200 LBS. |
PHYSICAL DIMENSIONS | |
Lift Height Overall: | 145" |
Floor To Overhead Switch: |
130" 141" |
Lift Width Overall: | 136" |
Drive Thru Clearance: | 105" |
Width Inside Columns: | 98" |
Width Outside Columns: | 128" |
VEHICLE LIFTING SPECS: | |
Max. Clearance Under Lift Arms: | 69½" |
Max. Lift Height (Natural): | 73½" |
Max. Lift Height (w/ Included Adapters): | 79" |
Min. Lift Pad Height: | 4" |
Safety Locking System: | SINGLE Point Release |
Lifting Time: | 50 Seconds |
LIFTING ARM SPECS: | |
Front Arm Reach (Symmetric): | 36" - 56" |
Rear Arm Reach (Symmetric): | 36" - 56" |
Front Arm Reach (Asymmetric): | NA |
Rear Arm Reach (Asymmetric): | NA |
POWER UNIT SPECS | |
Motor HP: | 2 HP |
Motor Voltage: | 220V |
Phase / Frequency / AMP: | 1P / 60Hz / 20 AMP |
Shipping Method: | Freight (LTL) |
---|---|
Shipping Length: | 108½" |
Shipping Height: | 29½" |
Shipping Width: | 38" |
Shipping Weight | 2,200 LBS. |
This equipment weighs approximately 2,200 LBS. If you have any questions or would like more information on this equipment, Call 1-800-708-3126 to speak to a Pro-Series Equipment rep today.
This equipment will ship as a FREIGHT item via LTL common carrier. The customer is responsible for providing a shipping address that will be able to accept the shipment. Customers are responsible to ensure that the shipping address provided will be able to accomodate a large 18 wheel truck pulling into the drive / dock without any problems.
It is also the responsibility of the customer to unload the equipment from the truck when it is delivered. Due to the size and weight of the equipment, a forklift or wrecker boom will be required!
If the customer is unsure if the truck will be able to unload the shipment on their drive, and they do not have access to a commercial dock, it is strongly recommended that the equipment be delivered to a trucking terminal in the customer's area. The terminal staff will be able to unload the equipment from the trailer and load it onto a truck or trailer at no additional cost.
For more information on shipping policies for Pro-Series Equipment, click here.
This lift will come packaged between two steel shipping plates. The Power Unit will be banded to the lift, and all of the components, hardware and anchor bolts will be packaged inside the lift columns.
You will need the following items in order to install this lift:
Concrete Rotary Hammer Drill w/ ¾" Carbide Bit, Rubber Hammer, 2 LB. Sledge Hammer, Chalk Line & Square, Socket Wrenches, Open End Wrenches, Ratchet Driver, Locking Pliers, Measuring Tape, Screwdrivers, Torque Wrench, Step Ladder, 4' Bubble Level, & 12" Adjustable Wrench.
You will also need to have 3 Gallons of AW-32 non-foaming, non-detergent Hydraulic Fluid.
This lift requires a 220V, Single Phase power supply on a dedicated 20 AMP circuit breaker. All electrical wiring for this lift should be done by a certified electrician!
The lift should be installed on a level floor with a minimum of 4" - 6" of 3,000 psi concrete (sufficiently cured). If you are unsure of the thickness of the concrete, it is best to test drill where the lift is to be installed to verify the depth of the concrete.
The instructions in the included manual should be carefully followed step by step. Our lifts are often installed by our customers, and usually will take from 4-5 hours to finish. Professional lift installation services are likely available in your area for a fee, please consult your sale representative if you are interested in learning more!
1-800-708-3126 HOURS: Mon-Fri: 8am-5pm Sat: 8am-Noon | CONTACT US | DISTRIBUTOR LOGIN