PSE 12,000 BP 2 Post Base Plate Lift

PSE 12,000 BP

12,000 LB. 2 Post Base Plate Lift

PRODUCT OVERVIEW:

The PSE 12,000 BP is a heavy-duty, commercial grade, 12,000 LB. 2 Post Lift perfect for lifting heavy trucks and vans. This lift is made for home mechanics or high volume shops & garages.

This is a Two Post BASE PLATE / OPEN TOP Vehicle Lift. The PSE 12,000 BP features symmetric columns and heavy duty 12,000 LB. symmetric lifting arms.

The Base Plate Lift design used on this model allows this lift to be installed in low ceiling environments. The cables and hydraulic hoses are routed under a base plate between the two posts. With a post height of only 9'-2", this lift can be installed in almost any garage. Careful consideration must be taken for the vehicles that will be lifted, while the posts themselves require only low ceilings, the height of the actual vehicle itself, along with the lifting height of this equipment must be accounted for to prevent vehicle damage.

The PSE 12,000 BP lift also includes a 2 stage screw-up lifting adapters, a powerful 220V hydraulic power unit, SINGLE point safety lock release, powder coat finish, & all installation hardware.

$3,499.95

PRODUCT DETAILS:
Product Features:
  • Low Ceiling Post Design: The PSE 12,000 BP is perfect for low ceiling applications, The overall post height on this lift is only 9'-2" high!
  • 220V Power Unit: Our powerful 220V Power Units are manufactured to strict specifications and increase speed & durability for all Pro-Series Equipment lifts!
  • SINGLE Point Safety Lock Release: The single point safety lock release system makes operation easier for mechanics and increases service volume.
  • Heavy Duty Symmetric Lifting Arm Design: Symmetric 50 / 50 lilting arms.
  • Screw Pad Adapters: The telescopic screw-up pad design on this lift makes Truck Adapters unnecessary for most vehicles!
  • Rubber Door Guards: Rubber Door Guards on each post help to prevent accidental door dings and save you money!
  • Rugged Steel Carriage: The PSE 12,000 BP Carriages' Heavy-Duty design provides strength and security.
  • Base Plate Design: The cables and hoses on the PSE 12,000 BP run underneath a heavy-duty base plate to allow a convenient low ceiling design.
Product Specs for the PSE 10,000 BP
Model Number: PSE 12,000 BP
Weight Capacity: 12,000 LBS.
Design Style: Base Plate (Open Top)
Column Configuration: Symmetric
Lifting Arm Configuration: Symmetric
Shipping Weight: 2,200 LBS.
PHYSICAL DIMENSIONS  
Lift Height Overall: 111"
Lift Width Overall: 135"
Drive Thru Clearance: 99"
Width Inside Columns: 112"
Width Outside Columns: 125½"
VEHICLE LIFTING SPECS:  
Max. Clearance Under Lift Arms: 70"
Max. Lift Height (Natural): 74"
Max. Lift Height (w/ Included Adapters): 78"
Min. Lift Pad Height: 4"
Safety Locking System: SINGLE Point Release
Lifting Time: 50 Seconds
LIFTING ARM SPECS:  
Front Arm Reach (Symmetric): 36" - 56"
Rear Arm Reach (Symmetric): 36" - 56"
Front Arm Reach (Asymmetric): NA
Rear Arm Reach (Asymmetric): NA
POWER UNIT SPECS  
Motor HP: 2 HP
Motor Voltage: 220V
Phase / Frequency / AMP: 1P / 60Hz / 20 AMP

SHIPPING INFORMATION:
Package Dimensions:
Shipping Method: Freight (LTL)
Shipping Length: 114½"
Shipping Height: 30½"
Shipping Width: 40"
Shipping Weight 2,200 LBS.
Packaging Information:

This equipment weighs approximately 2,200 LBS. If you have any questions or would like more information on this equipment, Call 1-800-708-3126 to speak to a Pro-Series Equipment rep today.

Shipping Process:

This equipment will ship as a FREIGHT item via LTL common carrier. The customer is responsible for providing a shipping address that will be able to accept the shipment. Customers are responsible to ensure that the shipping address provided will be able to accomodate a large 18 wheel truck pulling into the drive / dock without any problems.

It is also the responsibility of the customer to unload the equipment from the truck when it is delivered. Due to the size and weight of the equipment, a forklift or wrecker boom will be required!

If the customer is unsure if the truck will be able to unload the shipment on their drive, and they do not have access to a commercial dock, it is strongly recommended that the equipment be delivered to a trucking terminal in the customer's area. The terminal staff will be able to unload the equipment from the trailer and load it onto a truck or trailer at no additional cost.

For more information on shipping policies for Pro-Series Equipment, click here.

INSTALLATION OVERVIEW:

This lift will come packaged between two steel shipping plates. The Power Unit will be banded to the lift, and all of the components, hardware and anchor bolts will be packaged inside the lift columns.

Required Tools & Materials:

You will need the following items in order to install this lift:

Concrete Rotary Hammer Drill w/ ¾" Carbide Bit, Rubber Hammer, 2 LB. Sledge Hammer, Chalk Line & Square, Socket Wrenches, Open End Wrenches, Ratchet Driver, Locking Pliers, Measuring Tape, Screwdrivers, Torque Wrench, Step Ladder, 4' Bubble Level, & 12" Adjustable Wrench.

You will also need to have 3 Gallons of AW-32 non-foaming, non-detergent Hydraulic Fluid.

Electrical Requirements:

This lift requires a 220V, Single Phase power supply on a dedicated 20 AMP circuit breaker. All electrical wiring for this lift should be done by a certified electrician!

Concrete Requirements:

The lift should be installed on a level floor with a minimum of 4" - 6" of 3,000 psi concrete (sufficiently cured). If you are unsure of the thickness of the concrete, it is best to test drill where the lift is to be installed to verify the depth of the concrete.

Installation Overview:

The instructions in the included manual should be carefully followed step by step. Our lifts are often installed by our customers, and usually will take from 4-5 hours to finish. Professional lift installation services are likely available in your area for a fee, please consult your sale representative if you are interested in learning more!

"You Can Always Count On The Pros!"

Subscribe To Our Newsletter!

Get these FREE email updates:

  • New Products
  • Special Offers
  • Expert Tips

Live Chat Support Software

1-800-708-3126     HOURS: Mon-Fri: 8am-5pm Sat: 8am-Noon | CONTACT US | DISTRIBUTOR LOGIN

Motorcycle Lifts 2 Post Lifts 4 Post Lifts Scissor Lifts
Tire Changers Wheel Balancers Tire Spreaders Brake Lathes Wheel Dollies
Sandblast Cabinets Shop Presses Oil Drains Jacks, Pumps & Rams Floor Jacks Transmission Jacks Engine Service Equipment Work Benches Salt Spreaders Snow Plows Main
About Us Contact Form Distributor Info Financing All Documentation Product Catalog Purchasing Checklist Shipping Info Warranty Info
PSE TCML PSE TCMLW PSE TCML XLT
PSE ATC 10,000 BP PSE ATC 10,000 OH PSE 10,000 BP PSE 10,000 OH PSE 12,000 BP PSE 12,000 OHP 2 Post Lift Accessories
PSE 8,000 CSP PSE 8,000 CSP XLT PSE 10,000 CSP PSE 10,000 CSP XLT PSE 12,000 FP PSE 14,000 FP PSE 14,000 FP 4 Post Lift Accessories
PSE TCPL6 Mid Rise Lift
PSE TC-150 PSE TC-260 PSE TC-370 PSE TC-470 PSE TC-570 Tire Changer Accessories
PSE WB-160 PSE WB-260 PSE WB-360 PSE WB-BWB Wheel Balancer Accessories
PSE TCTS1 PSE TCTS2 PSE TCTS3
PSE TCSC1 PSE TCSC2 PSE TCSC3
PSE SP-9220 PSE SP-9020 PSE SP-9120A PSE SP-9030 PSE SP-9240
PSE TCTDNP PSE JM-POD-18G PSE JM-ODT-68L PSE JM-ODT-30G PSE JM-OEX-18G PSE 17892 PSE TCGC
Pumps Bottle Jacks Rams & Cylinders